Reprogeräte and accessoriesör
- Kaiser LED Illuminator RB 560 AL
- LED arrays: 2 x 272 SMD LEDs
- Color temperature: 5600 K
- Color rendering index: CRI = 95
- Illuminance* with soft lens: 6800 Lux, without soft lens: 8000 lux
- Power consumption: 2 x x{2264} 40 W
- Operating voltage: 24 V
- Light emission area of one luminaire: 58 x 16.5 cm
- Vertical rods: Length 76 cm / cross section 20 x 20 mm
Kaiser LED lighting device RB 560 AL
- Image Capture Set R2N CP
- Transportable camera tripod
- Daylight High Frequency Illuminator
Kaiser R2N CP
- Fluorescent lamp
- 36 watt
- 5400 K
Kaiser for RB 5004
- Novoflex mounting table 60x50x23cm
- especially for plates MS 50, MST 50
- Size: 60 x 50 x 23 cm
- Weight: 1.5 kg
Novoflex MagicStudio recording table for MS 50
Free live consultation
Your individual consultation - from the comfort of your sofa
- Guide column made of aluminum multi-chamber special profile
- motorized height-adjustable camera support
- imprinted cm and inch scales
- two locking screws for fixing
- Cable remote control
Kaiser Guiding column Rdmot 1.2, height 1.20 m, with motorized height-adjustable camera carrier
- Novoflex MS-Repro-Light
- LED array: 105 SMD LEDs
- Color temperature: 5600 Kelvin
- Color rendering index: CRI=95
- Beam angle: 110°
- Power consumption: 17 W
- Illuminance: 4300 lux (measured at the highest possible homogeneity of illumination of a DIN A4 document)
Novoflex 2 x repro lighting with flexible arms and ball head
- Kaiser guide pillar RDmot 1.8
- Column height: approx. 1.80 m
- Column cross-section: 105 x 74 mm
- max. load: 8 kg
- Camera mounting plate: 130 x 78 mm
- Connection thread: B 1/4 / B 3/8 interchangeable
Kaiser Guide column RDmot 1.8, 1.80 m, with motorized height-adjustable camera carrier
- Slide copying set
- consisting of a receptacle and a cover for an inverted color mixing head
- enables the use of any Kaiser color mixing head as an illumination device for slide copying
Kaiser Slide Copy Set
- Base board (WxHxD): approx. 900 x 38 x 730 mm
- Height of the guide pillar: approx. 1.80 m
- Column cross-section: 105 x 74 mm
- Maximum load: 8 kg
- Camera mounting plate: 130 x 78 mm
- Connection thread: B 1/4 / B 3/8 interchangeable
Kaiser RSD mot 18
- Guide column made of special aluminum multi-chamber profile
- with manually height-adjustable camera support
- with printed cm and inch scales
- two locking screws for fixing
- Height adjustment with hand crank or motorized
- height-adjustable feet
- Spirit level on the base
Kaiser Repro stand RSD 1.2, column height 1.20 m, base board 68 x 57 cm, with manually height-adjustable camera carrier.
- Repro and title arm RT 1
- Camera mounting points for landscape and portrait format shots
- with exchangeable connection thread B 1/4 / B 3/8 and rubber pads
- Camera support can be moved horizontally via parallel guide and fixed in any position
- Entire repro and title arm swivels for reproducing vertical originals
Kaiser RT-1 5521
- Studio kit for macro and product photography with professional cameras
- Ideal for objects up to approx. 22 x 22 cm
- Contains MS-MACRO-REPRO, MS 30 and 2x TS-KLAMMER
Novoflex Macro repro stand, studio kit
- Set for high-quality reproduction and duplication, as well as macro and product photography with professional cameras
- Consists of MS-MACRO-REPRO, MS-FIMCOP, MS-REPRO-LIGHT, MS-REPLA, MS 30, TL-KLAMMER and PLATTE-M
- Enables slide and negative duplication of various formats
- Ideal for products up to approx. 22 x 22 cm
Novoflex Macro repro stand, complete set
- Kaiser wooden base plate for shooting table
Kaiser for shooting table
- For mounting camera arms
Kaiser RA-RSP 4421
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Am Außenlager. Lieferzeit 4-6 Werktage nach Zahlungseingang
Der Artikel ist vor Ort in unserem Hauslager nicht vorrätig und wird nach erteiltem Kundenauftrag am Außenlager/beim Hersteller bzw. Distributor bestellt. Die zu erwartende Lieferzeit beträgt 4-6 Werktage.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.